Senior Rigger Practice Test

These questions are part of the practice quiz. Start practicing

• When considering alterations to a parachute, which statement is accurate?
• In relation to a dual parachute pack used for intentional jumping, which of the following may be accomplished by the person who intends to use the parachute?
• What should be done with damaged or worn rigging equipment?
• What is one requirement for a member of the US Armed Forces applying for a Master Parachute Rigger certificate, if they do not hold a Senior Parachute Rigger certificate?
• What are the signs that indicate a properly rigged load?
• When is an Airworthiness Directive (AD) typically issued for a product?
• What is the minimum period of time an applicant for a Senior Parachute Rigger certificate shall have served as a parachute rigger?
• Why is it essential to understand the limits of lifting equipment?
• What action should be taken if a rigger identifies defects during packing?
• What must a certificated parachute rigger verify before packing a parachute subject to an Airworthiness Directive?
• If signals are not clearly understood during a lift, what should be done?
• What is the primary function of a hoist?
• What is the purpose of the reserve parachute?
• An applicant for a Master Parachute Rigger certificate must have packed a minimum number of parachutes under the supervision of which of the following?
• Which of the following statements is true regarding the minor repairs of parachute canopies?
• Which component of a parachute pack is essential for safe deployment?
• What type of hazard is associated with improper rigging?
• How does a site assessment benefit a lifting operation?
• A certificated parachute rigger cannot exercise privileges unless?
• What factor should be considered when choosing a rigging method?
• Which of the following is a crucial consideration for a rigger before beginning a lift?
• Which statement is correct in reference to the skill requirements for a Senior Parachute Rigger certificate?
• What is a competency requirement for a Master Parachute Rigger?
• How should a rigger react to adverse weather conditions?
• What factor primarily influences the issuance of a product's Airworthiness Directive (AD)?
• What type of weather conditions should lead to postponing a lift?
• Which of the following is an eligibility requirement for a Master Parachute Rigger certificate?
• What characterizes a qualified rigger?
• What is the best way to check for visible damage on rigging equipment?
• What should a rigger do if they notice damage to a parachute before a jump?
• Who is qualified to pack, maintain, and alter a back type parachute for emergency use?
• Who can pack, maintain, or alter the auxiliary parachute of a single harness dual parachute pack?
• Which of the following is essential to maintain a safe lifting environment?
• A certificated Senior Parachute Rigger applying for an additional type rating must take which of the following tests?
• What is the role of environmental conditions in the rigging process?
• What should a rigger ensure about the rigging equipment being used?
• Who is privileged to perform alterations to the auxiliary canopy of a single harness dual parachute pack for intentional jumping?
• Which statement regarding the requirements for a Master Parachute Rigger certificate is true?
• What is the significance of the center of gravity in lifting operations?
• How can a certificated rigger demonstrate competence to the FAA?
• Which sling type is noted for being the strongest and most versatile?
• What type of housing must be available for a parachute rigger when exercising certificate privileges?
• What should you do if a load swings during lifting?
• What are the potential hazards of flying loads?
• What documentation must a parachute rigger maintain for each parachute packed?
• What are the privileges of a certificated Senior Parachute Rigger related to parachute maintenance?
• According to FAR Part 65, which is a requirement for a Senior Parachute Rigger Certificate?
• During a jump, what is the best action to take if a parachute malfunctions?
• What typically occurs during a "pre-lift meeting"?
• How long must a parachute rigger retain packing and maintenance records?
• What is an important consideration when packing a parachute?
• What is the first step in ensuring rigging safety?
• What does SWL stand for in rigging terminology?
• When applying for an additional type rating, how many parachutes must a certificated Senior Parachute Rigger have packed?
• If a rigger hasn't performed duties under their certificate for the last 12 months, what must they do?
• Who may pack the main parachute of a dual parachute pack intended for jumping?
• What must a Senior Parachute Rigger avoid when considering alterations to parachute equipment?
• What evidence must an applicant provide for a Master Parachute Rigger Certificate in terms of parachute packing?
• Which of the following is a common sign of an overloaded rigging system?
• What is a tag line used for in rigging?
• What distinguishes a rigger from a signal person?
• What consequence can result from improper inspection of slings?
• What type of hazard must riggers be aware of when lifting loads outdoors?
• What is the primary purpose of a rigger in construction?
• What is the primary purpose of using tag lines during a lift?
• Which of the following is NOT a type of rigging equipment?
• What statement is true regarding the qualifications for becoming a Senior Parachute Rigger?
• Which testing requirement applies to a military rigger applying for a Senior Parachute Rigger certificate?
• What facilities and equipment are required for a certificated parachute rigger to pack the main parachute of a dual parachute pack used by him/her?
• Can a Senior Parachute Rigger alter the length of the bridle line that connects to the pilot chute?
• Which factor is essential when assessing load dynamics during rigging?
• How frequently should rigging equipment be inspected?
• Who is allowed to pack, maintain, and alter a chest-type parachute for emergency use?
• What role does an appropriately rated parachute rigger play in the supervision of an applicant for a Senior Rigger certificate?
• Regarding the ability of a Senior Parachute Rigger to make repairs, which of the following is true?
• Which alteration does not require a record of entry for a single-harness dual parachute pack?
• Which statement accurately describes a Senior Parachute Rigger's capabilities regarding canopy alterations?
• Why are load charts significant in rigging?
• Which is not a purpose of the seal and safety tie on a parachute pack?
• For what type ratings is a Master Parachute Rigger eligible after holding a back type rating for 6 years?
• What are the seven steps of rigging safety?
• What should you do if you see someone working dangerously around rigging?
• Which statement regarding sealing a parachute pack is true?
• When is a parachute rigger required to supervise a packing job?
• Why is it crucial to understand the ratings of rigging equipment?
• What is true about the minimum facilities and equipment required for packing main parachutes for intentional jumping?
• What must be done after packing a parachute for emergency use?
• What is the role of the jumpmaster in a parachuting scenario?
• Why is communication crucial during rigging operations?
• What is the minimum experience required to apply for a Master Parachute Rigger Certificate?
• What condition must an applicant for a Master Parachute Rigger certificate fulfill regarding experience?
• How can wind affect rigging operations?
• What should a Senior Parachute Rigger do if they find a parachute canopy that is damaged during inspection?
• What is the standard practice for securing loads in transit?
• In rigging, what does the term "bridle" refer to?
• When packing the main parachute of a dual parachute pack, what is true of a certificated parachute rigger?
• What is the primary purpose of testing a parachute before use?
• What should be immediately done if a rigging incident occurs?
• What information must a rigger record on the packing record after packing a parachute?
• Which of the following is essential for safe rigging practices?
• What does "reeving a block" refer to?
• What is a common indicator of a rigging issue in parachutes?
• Why is it important to communicate effectively during rigging operations?
• What should a rigger prioritize in the assessment after a lift?
• What is the required method for sealing a pack after inserting the ripcord pins in a back type parachute?
• Who is permitted to pack the main parachute of a single harness dual parachute pack intended for jumping?
• What is the most critical aspect of communication when rigging a load?
• A parachute rigger is required to present his/her certificate for inspection upon the request of?
• Who is responsible for submitting data necessary for the issuance of an Airworthiness Directive (AD)?
• Which component is vital to ensure during a lift?
• What type of signals should be established during rigging operations?
• Which component is essential for measuring the weight of loads in rigging?
• What is the significance of performing a rigging inspection?
• What is a required step for a member of the US Armed Forces applying for a Senior Parachute Rigger certificate?
• What is “two-blocking” in rigging?
• The primary role of a rigger during a lift is to?
• In rigging, what is the concept of load limit?
• What type of test must a certificated parachute rigger pass to apply for an additional type rating?
• Why is awareness of load dynamics critical during lifting?
• What action can lead to the suspension or revocation of a parachute rigger certificate?
• If a parachute is requested to be packed in a manner other than the manufacturer's approved method, what should the rigger do?
• Which aspect of rigging is crucial for team awareness and safety?
• What is required regarding the conditions of the AD for a certified rigger before they may pack a parachute?
• Federal Aviation Regulations (FARS) provide for the issuance of which type ratings for parachute riggers?
• What is a “pivot point” in rigging terminology?
• When is a rigging certificate required for performing alterations on parachute equipment?
• What detail is not required to be recorded by a parachute rigger?
• Which of the following factors should be considered when evaluating environmental conditions for rigging?
• Who may maintain or alter the main parachute for intentional jumping?
• What is the purpose of securing a load with a harness or lanyard?
• An applicant for a Senior Parachute Rigger certificate must have packed a minimum number of parachutes under the supervision of which of the following?
• How many of the following are included in the knowledge requirements for a Senior Parachute Rigger certificate?
• What does “center of gravity” refer to in rigging?
• What is the risk of using damaged or altered rigging?
• When is it appropriate to use a choker hitch?
• Which statement is true about the record-keeping responsibilities of a parachute rigger?
• What must be performed before lifting a load to ensure safety?
• What is the difference between static and dynamic loading?
• What is essential for ensuring parachute safety and compliance during packing and maintenance?
• What is the correct way to store rigging equipment?
• What is the formula for calculating the weight of a load using volume and density?
• What type of repair is chrome plating a cadmium plated load-carrying parachute fitting classified as?
• What is classified as a major repair when dealing with parachute fittings?
• What aspect of parachute maintenance is emphasized in terms of record-keeping?
• Which of the following is a common risk when rigging?
• What is the term for incorrectly estimating the weight of a load?
• How many parachutes must an applicant for a Senior Parachute Rigger certificate show that he/she has packed?
• Why is it important to conduct a site assessment before a lift?
• What is the minimum age requirement for an applicant to receive a parachute rigger certificate?
• What does a major alteration typically involve in parachute rigging?
• What is the role of a certificated mechanic with an airframe rating regarding parachutes?
• Select the correct statement regarding the privileges of a certificated parachute rigger.
• What is the minimum certification requirement for performing alterations to parachutes?
• Which statement is true when packing the main parachute of a dual parachute pack for intentional jumping?
• Where is the most critical area to check for damage on a parachute?
• What must a certificated parachute rigger do before packing for intentional jumping?
• What does the "safety factor" in rigging indicate?
• Before a jump, what should a rigger do to ensure safety with gear?
• Which individual does not have the authority to request the presentation of a parachute rigger's certificate?
• What does the term "hitch" refer to in rigging?
• How many parachutes must a certificated Master Parachute Rigger have packed to apply for an additional type rating?
• What is a requirement for a parachute rigger to exercise the privileges of their certificate?
• What precaution should be taken regarding electrical lines during the rigging process?
• What is a critical factor in selecting rigging equipment?
• For a certificated Master Parachute Rigger applying for an additional type rating, what is needed?
• Which statement describes the privileges of a Senior Parachute Rigger's certificate?
• Which action is crucial when conducting a pre-jump check on a parachute?
• What should a rigger do if unable to comply with alteration record-keeping requirements?
• What is the role of a load cell in rigging?
• What is the “golden rule” related to rigging safety?
• According to Federal Aviation Regulations, what must be recorded by a rigger for each parachute?
• What is a common cause of accidents in rigging operations?
• Who is allowed to alter the auxiliary parachute of a single harness dual parachute pack?
• What safety gear should be worn when rigging?
• According to regulations, what is a performance standard for Senior Parachute Riggers?
• What is the primary function of the harness in a parachuting setup?
• What action is crucial when dealing with a heavy lift?
• What is the purpose of a "spreader bar" in rigging?
• What should be checked before using a sling?
• What determines the extent of work a Senior Parachute Rigger can perform?
• What is the main function of a jib crane?
• How many parachutes in total must be packed to meet certification requirements for a Master Parachute Rigger?
• What are the benefits of conducting regular maintenance on parachute equipment?
• What should be done if a load shifts during hoisting?
• Which of the following is NOT a requirement for issuing a Senior Parachute Rigger certificate to a civilian employee of the US Armed Forces?
• Which of the following alterations must be recorded for a single-harness dual parachute pack?
• What is the purpose of using a tag line during a lift?
• During a lift, what should be established before proceeding?
• When should a rigger replace parachute lines?
• Who is eligible to supervise others in packing and maintaining parachutes?
• What are the critical factors affecting the stability of a load during a lift?
• In terms of parachute rigging certification, what does evidence of packing relate to?
• What is the main purpose of a rigging plan?
• In rigging, what is meant by the term 'load capacity'?
• Which individual may pack, rig, and approve drag chutes for return to service?
• What is a primary advantage of using synthetic slings in rigging?
• If you have recently received your Senior Parachute Rigger certificate, can you pack a parachute immediately?